Step 1.
Start witht the disassembly lever in the 12'o clock position.
Step 2.
Push the lever towards the rear to about the 2'o clock position. The lever should
have popped out a little.
Step 3.
If the pistol is pointed away from you, push the disassembly lever to the left until
it is no longer conected to the right side of the frame.
Step 4.
Part of a spring arm helps hold the lever in the frame. Pull the lever to the left
again until it is against the left side of the frame. Continue to pull the lever
while rotating it clockwise and it will leave the frame.
when reassembling.
Put the disassembly in the frame with the arm pointing down to the 6'o clock position.
While pushing in rotate the lever clockwise and the lever will slide in the frame halfway.
Continue rotating the lever and it will slip into the frame fully.
Click below to continue next steps in slide disassembly
