Step 1.
Using a 3/32 punch and a mallet tap out the front locking block pin.
Note.
The locking block pins have indentations on both ends. The locking block pin retainer rides
in these groves and keeps the pins from working out durring normal usage.
Step 2.
Using a punch knock out the locking block trigger pin. It is the same as before and both are
identical.
Step 3.
Using your hands slowly pull up on the locking block.
Note.
Carefully remove the locking block, becuase the slide stop lever spring is attached
and will fall out and could be lost.
Step 4.
Remove the slide stop lever spring from the locking block.
Click below to continue next steps in slide disassembly
